Tray Filler Mk9 Fully Automatic Cigarette Machine PLC Control Customize

 
 
Configuration: Maker+ Assembler+ Tray Filler
 
It can be customized to produce king size cigarettes(7.8mm x 84mm), super slim cigarettes or kreteks with different size. The cigarette weight can be inspected,and the faulty cigarettes will be rejected online automatically. This type of combination has been sold to Asia, Africa, Europe and North America, widely popular in the international marketplace.
 
 
Highlights
 
1. The cigarette cutting system uses the double-knife single-cutting system with lower-rise temperature and lower noise. This gives the very good quality of the cigarette cut.
2. The complete suction system and high air pressure system .
3. The hopper system adopts AC servo motor to directly drive the tobacco cutting system. The timing belts are used instead of the gears, so the even tobacco-feeding is greatly improved and the maintenance cost is reduced as well.
4. Control center: it adopts the SIEMENS PLC S7-300 series.
5. Man-machine interface: The SIEMENS touch screen provides friendly man-machine interface, which displays the machine status and production data precisely. It is also convenient to modify the system parameter and check out the failure. 
6. It adopts AC servo driving system that simplifies the mechanical structures and reduces the failure and maintenance cost, and improves the transmission precision.
7. Weight controller: the microwave weight control system is adopted to avoid any harm to people.
 
 
Parameters

 
 
Making Process Requirements
 

 
 
Making Process Requirements

1, Ambient conditions
Temperature: 20--30
Relative humidity: 62--68
 
2, Paper bobbin
Tensile strength ≥0.85KN/m
Extensibility 1.6
Humidity: 6±1.5
Joint number 1/1000 m
 
3, Width: 48±0.3 mm
Thickness: 0.04mm0.05 mm
 
4, Cut tobacco
Grade: A
Humidity: 12.5±0.5
 
5, 5.5bar
 
6, Viscosity of VPA
For the maker: 2500mPa.s-5000mPa.s
For the assembler: 5000mPa.s-10000mPa.s
 
 
Picture