MK9 Cigarette Making Machine manufacturer from China Yuanyi international co. limited

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Three Parts Made Of MK9 Cigarette Making Machine Frequency 50Hz

Hig

Three Parts Made Of MK9 Cigarette Making Machine Frequency 50Hz

Highlights

1. The cigarette cutting system uses the double-knife single-cutting system with lower-rise temperature and lower noise. This gives the very good quality of the cigarette

cut.

2. The complete suction system and high air pressure system .

3. The hopper system adopts AC servo motor to directly drive the tobacco cutting system. The timing belts

are used instead of the gears, so the even tobaccofeeding is greatly improved and the maintenance cost is reduced as well.

4. It adopts AC servo driving system that simplifies the mechanical structures and reduces the failure and maintenance cost, and improves the transmission precision

Parameters

Output	5000cig/min (Normal Size) 3500cig/min (super slim/Nano)
Frequency	50Hz
Total power	50KVA
Cigarette parameter	Outside dimensions
Filter-cigarette length	65 110± 0.5 mm
Cigarette maker	3630× 1270 × 1870mm
Tobacco rod length	55 90 mm
Plug assembler	3340×1340× 1820mm
Cigarette diameter	φ 5.4 φ 9.0 mm
Tray Filler	2350×2400× 2100mm
Power supply	380V ± 10%(3phases)
Total weight	8600kg

Making Process Requirements

1. Ambient conditions
Temperature	20--30
Relative humidity	62--68
2. Paper bobbin
Tensile strength	≥0.85KN/m
Extensibility	1.6
Humidity	6±1.5
Joint number	1/1000 m
3. Width	48±0.3 mm
Thickness	0.04mm0.05 mm
4. Cut tobacco
Grade	A
Humidity	12.5±0.5
5. Compress air	5.5bar
6. Viscosity of VPA
For the maker	2500mPa.s-5000mPa.s
For the assembler	5000mPa.s-10000mPa.s